SHELF DESIGN
Calculate materials and hardware needed for custom shelf construction.
3D SHELF PREVIEW
INTERACTIVE 3D SHELF PREVIEW: Click and drag to rotate, scroll to zoom. View your shelf design with brackets and wall mounting.
SHELF CALCULATION RESULTS
BOARD FEET NEEDED
1.65 BF
Base: 1.5 BF + waste
BRACKETS REQUIRED
4 PCS
WEIGHT CAPACITY
7 LBS
Total for 1 shelves
SHELF WEIGHT
3.1 LBS
Material weight only
ESTIMATED TOTAL COST
$23.77
SHOPPING LIST
CUT LIST
| DESCRIPTION | LĂWĂT | QTY |
|---|---|---|
| Shelf Board - Pine | 36" Ă 8" Ă 0.75" | 1 |
LOAD ANALYSIS
PROFESSIONAL INSTALLATION TIPS
3D VISUALIZATION
Use the interactive 3D preview to visualize your shelf design, bracket placement, and mounting configuration before construction.
BRACKET SPACING GUIDELINES
Books and heavy items: 16" max spacing. Light decorative items: up to 32". Always include brackets within 6" of shelf ends.
MATERIAL SELECTION
Pine: economical, lightweight. Oak: strong, premium appearance. Plywood: stable, paint-grade. MDF: smooth finish, avoid moisture.
WALL ANCHOR SELECTION
Drywall: toggle bolts for heavy loads. Studs: 3" wood screws preferred. Concrete: tapcon screws or anchors. Always verify wall construction.
LOAD CAPACITY FACTORS
Capacity depends on span, thickness, material, and bracket strength. Calculations include 4:1 safety factor for residential use.
WOOD MOVEMENT
Allow for seasonal wood movement. Solid wood expands/contracts more than engineered materials. Orient grain perpendicular to length when possible.
FINISHING RECOMMENDATIONS
Sand progressively to 220 grit. Pre-stain conditioner for pine. Apply finish before installation for best results. Allow full cure time.