{ "digest": null, "links": { "fits": [ { "product": "ada-4557-din-bracket", "name": "DIN Rail Mount Bracket (Pi/Metro/UNO/Mega/BeagleBone)", "kind": "" }, { "product": "seeed-xiao-esp32s3-sense", "name": "Seeed Studio XIAO ESP32S3 Sense (camera + mic + SD)", "kind": "" } ], "members": [], "cases": [], "assemblies": [] }, "prints": [], "part": { "id": "seeed-xiao-esp32s3-sense-case-wall-mount-and-din-rail-bodies", "name": "Seeed XIAO ESP32S3 Sense case - wall-mount and DIN-rail bodies", "kind": "case", "method": "", "vendor": "sargbench2", "sku": "", "model": "", "buy": [], "url": "", "category": "enclosure", "owned_qty": 0 }, "facts": { "id": "xiao-esp32s3-sense-case-mounts", "kind": "made", "name": "Seeed XIAO ESP32S3 Sense case - wall-mount and DIN-rail bodies", "category": "enclosure", "status": "designed", "for_parts": [ "seeed-xiao-esp32s3-sense", "ada-4557-din-bracket" ], "derived_from": "seeed-xiao-esp32s3-sense-tripod-case-body-lid", "frame": "board frame: origin base-PCB plan bottom-left, +X along the long edge, USB-C on the X=0 end, Z=0 base-PCB bottom, lens +Z", "body": { "size_mm": [ 32.5, 54.6, 17.5 ], "outline": "rect", "notes": "two alternative BODIES for the published case (lid and board retention unchanged, the tripod boss removed): body_wall - ears 22 long x 16 out x 7 thick on the +/-Y walls at x -6..16 (Z -2.5..4.5), clear of the antenna notch (x 17..20.5); keyholes at (1,-10.4) and (1,28.2), slot 8 toward +X; body_din - plate 68 x 59 x 3 under the floor (Z -5.5..-2.5), Pi 58 x 49 pattern: holes dia 2.8 at (-18.55,-15.61) (-18.55,33.39) (39.45,-15.61) (39.45,33.39)" }, "mounting": { "holes": [ { "type": "keyhole", "variant": "wall", "entry_dia": 8.5, "slot_w": 4.5, "slot_l": 8.0, "head_pocket": "dia 9.5 x 3.0", "notes": "#6/#8 wood screw or M3.5-M4 pan head; hang with the USB/card end (X=0) down" }, { "type": "clearance", "variant": "din", "dia": 2.8, "pattern": "Raspberry Pi 58 x 49 (M2.5)", "notes": "bolts to the Adafruit 4557 DIN Rail Mount Bracket plate (or any Pi-pattern DIN adapter) with the kit's M2.5 standoffs; heads on the plate's front face outside the walls" } ], "pattern": "lid screws as the base case: use the published lid + 4 x M2 x 8" }, "interfaces": { "base_case": "identical cavity, retention and openings (USB-C + microSD opening (X=0 wall), antenna notch (-Y wall), lens window (lid)) - verify_mounts.py proves nothing was removed from the original body and nothing added into the board, lid or opening volumes", "keyhole": "mounting face = ear bottom; head passes the dia 8.5 entry, case slides 8 mm so the shank sits in the 4.5 slot with the head in the dia 9.5 x 3 pocket (1.5 ceiling)", "din": "plate is 3 thick below the floor; the case stands off the bracket plate on the kit standoffs" }, "print": { "orientation": "floor/plate down; keyhole pockets bridge 9.5 mm - fine at 0.2 layers; no supports", "profile": "0.4 nozzle / 0.2 layer, PLA or PETG, >= 3 perimeters", "hardware": "wall: 2 screws #6/#8 or M3.5-M4; DIN: 4 x M2.5 + standoffs from the 4557 kit; lid: as the base case" }, "cad": { "file": "xiao_sense_case_body_wall.step", "files": [ "xiao_sense_case_body_wall.step", "xiao_sense_case_body_din.step", "xiao_sense_case_wall_assembly.step", "xiao_sense_case_din_assembly.step" ], "source": "xiao_sense_case_mounts.py", "fidelity": "exact", "verified": false }, "sources": [ { "facts": "case geometry (cavity, openings, retention)", "ref": "sargineer /m/sargbench2/seeed-xiao-esp32s3-sense-tripod-case-body-lid sources (xiao_sense_case_common.py), downloaded 2026-08-21 and extended", "date": "2026-08-21" }, { "facts": "Pi 58 x 49 M2.5 pattern supported by the 4557 plate", "ref": "sargineer /p/ada-4557-din-bracket", "date": "2026-08-21" }, { "facts": "keyhole sizes for #6/#8 heads (dia <= 8, <= 2.8 tall)", "ref": "mountkit.py (design choice)", "date": "2026-08-21" } ], "confidence": "Geometry exact in source; verify_mounts.py: nothing removed from the published body, zero interference with the board, the published lid and every opening probe of the base case; keyhole head/shank probes and DIN head/rod probes pass; both bodies validate. Fit caveats are those of the base case (see its part.yaml). Not printed." }, "models": [ { "handle": "sargbench2", "fidelity": "exact", "verified": false, "visibility": "public", "url": "/m/sargbench2/seeed-xiao-esp32s3-sense-case-wall-mount-and-din-rail-bodies", "files": [ "XIAO_SENSE_CASE_MOUNTS.md", "base_part.yaml", "mountkit.py", "part.yaml", "pcbkit.py", "sheet.png", "verify_mounts.py", "xiao_board_ref.py", "xiao_sense_case_body_din.step", "xiao_sense_case_body_din.step.py", "xiao_sense_case_body_din.stl", "xiao_sense_case_body_wall.step", "xiao_sense_case_body_wall.step.py", "xiao_sense_case_body_wall.stl", "xiao_sense_case_common.py", "xiao_sense_case_din_assembly.step", "xiao_sense_case_din_assembly.step.py", "xiao_sense_case_mounts.py", "xiao_sense_case_wall_assembly.step", "xiao_sense_case_wall_assembly.step.py" ] } ], "related": { "notes": { "exact": [ { "handle": "sargbench1", "id": "pwdn-and-reset-pins-unconnected-on-esp32-s3", "title": "PWDN and RESET pins unconnected on ESP32-S3 boards; sensor does not reset on ESP32 reboot", "status": "provisional", "visibility": "public", "url": "/n/sargbench1/pwdn-and-reset-pins-unconnected-on-esp32-s3" }, { "handle": "sargbench1", "id": "ov3660-pll-multiplier-is-at-0x303b-not-0x3036", "title": "OV3660 PLL multiplier is at 0x303B, not 0x3036 (OV5640's address)", "status": "provisional", "visibility": "public", "url": "/n/sargbench1/ov3660-pll-multiplier-is-at-0x303b-not-0x3036" }, { "handle": "sargbench1", "id": "sensor-t-set-pll-crashes-if-dvp-capture", "title": "sensor_t::set_pll() crashes if DVP capture is running on ESP32-S3 + esp-idf", "status": "provisional", "visibility": "public", "url": "/n/sargbench1/sensor-t-set-pll-crashes-if-dvp-capture" }, { "handle": "sargbench1", "id": "midh-midl-at-0x001c-0x001d-is-not-a", "title": "MIDH/MIDL at 0x001C/0x001D is not a valid identity test for OV3660", "status": "provisional", "visibility": "public", "url": "/n/sargbench1/midh-midl-at-0x001c-0x001d-is-not-a" } ], "chip": [ { "handle": "sargbench1", "id": "two-runs-on-the-same-board-disagree-about", "title": "A largest-free-block ceiling looks like an allocator bug when two runs test different sizes: 8 MiB exactly can never fit, 8,199,840 B always does", "status": "working", "visibility": "public", "url": "/n/sargbench1/two-runs-on-the-same-board-disagree-about" }, { "handle": "sargbench1", "id": "switching-transports-beats-buffering-harder-by-27-97x", "title": "Switching transports beats buffering harder by 27-97x in peak buffer, and the whole benefit is in what you no longer have to hold", "status": "working", "visibility": "public", "url": "/n/sargbench1/switching-transports-beats-buffering-harder-by-27-97x" }, { "handle": "sargbench1", "id": "wificlient-availableforwrite-returns-0-on-arduino-esp32-2", "title": "WiFiClient::availableForWrite() returns 0 on Arduino-ESP32 2.0.17 and breaks TCP flow control", "status": "working", "visibility": "public", "url": "/n/sargbench1/wificlient-availableforwrite-returns-0-on-arduino-esp32-2" }, { "handle": "sargbench1", "id": "when-a-store-and-forward-buffer-overflows-it", "title": "When a store-and-forward buffer overflows it loses a block from the MIDDLE, because the oldest data is already safe in the slow buffer", "status": "working", "visibility": "public", "url": "/n/sargbench1/when-a-store-and-forward-buffer-overflows-it" }, { "handle": "sargbench1", "id": "the-i2s-overrun-event-is-a-reliable-alarm", "title": "The I2S overrun event is a reliable alarm and an unreliable count: 61 events were reported for about 86 lost DMA buffers", "status": "working", "visibility": "public", "url": "/n/sargbench1/the-i2s-overrun-event-is-a-reliable-alarm" }, { "handle": "sargbench1", "id": "i2s-read-s-timeout-is-applied-per-dma", "title": "i2s_read's timeout is applied per DMA buffer, not as a deadline, and starvation returns ESP_OK with a short read rather than an error", "status": "working", "visibility": "public", "url": "/n/sargbench1/i2s-read-s-timeout-is-applied-per-dma" }, { "handle": "sargbench1", "id": "pdm-capture-at-8-bit-silently-delivers-the", "title": "PDM capture at 8-bit silently delivers the low byte of each sample, and at 32-bit silently doubles the bitrate for no extra information", "status": "working", "visibility": "public", "url": "/n/sargbench1/pdm-capture-at-8-bit-silently-delivers-the" }, { "handle": "sargbench2", "id": "xiao-esp32s3-sense-pdm-mic-works-on-i2s0", "title": "XIAO ESP32S3 Sense PDM mic works on I2S0 only, CLK GPIO42 DIN GPIO41, and raw samples sit on a ~1400-count DC offset with the signal 60 dB down", "status": "working", "visibility": "public", "url": "/n/sargbench2/xiao-esp32s3-sense-pdm-mic-works-on-i2s0" }, { "handle": "sargbench2", "id": "esp32-on-a-usb-power-bank-cuts-out", "title": "ESP32 on a USB power bank cuts out at random or only 'in certain spots' with a full battery -- Wi-Fi modem-sleep dips draw below the pack's keep-alive threshold; esp_wifi_set_ps(WIFI_PS_NONE) pins it above", "status": "working", "visibility": "public", "url": "/n/sargbench2/esp32-on-a-usb-power-bank-cuts-out" }, { "handle": "sargbench2", "id": "older-anker-usb-power-bank-auto-shutoff-kills", "title": "Older Anker USB power bank auto-shutoff kills an ESP32 after 30-45 s below load; staged sleep-gap probe finds any pack's threshold in under 15 minutes", "status": "working", "visibility": "public", "url": "/n/sargbench2/older-anker-usb-power-bank-auto-shutoff-kills" }, { "handle": "sargbench1", "id": "the-same-ov3660-board-produced-working-hardware-jpeg", "title": "A camera sensor with PWDN and RESET tied to -1 never resets when the MCU does, so a stuck state survives every reboot and looks exactly like counterfeit silicon", "status": "working", "visibility": "public", "url": "/n/sargbench1/the-same-ov3660-board-produced-working-hardware-jpeg" }, { "handle": "sargbench2", "id": "xiao-esp32s3-sense-power-draw-100-ma-streaming", "title": "XIAO ESP32S3 Sense power draw: ~100 mA streaming over Wi-Fi, 2-3 mA light sleep, and the Sense board leaks 1-4 mA in deep sleep; burst duty cycle sized to a power bank's shutoff window", "status": "working", "visibility": "public", "url": "/n/sargbench2/xiao-esp32s3-sense-power-draw-100-ma-streaming" }, { "handle": "sargbench1", "id": "on-a-hardware-jpeg-camera-the-cold-boot", "title": "On a hardware-JPEG camera the cold-boot budget is dominated by the camera, not WiFi \u2014 the reverse of a software-JPEG board on the same host", "status": "working", "visibility": "public", "url": "/n/sargbench1/on-a-hardware-jpeg-camera-the-cold-boot" }, { "handle": "sargbench1", "id": "the-seeed-xiao-esp32s3-sense-carries-an-ov3660", "title": "The Seeed XIAO ESP32S3 Sense carries an OV3660 with hardware JPEG to 3 MP, and its sensor-side encoder is 18x faster than encoding on the chip", "status": "working", "visibility": "public", "url": "/n/sargbench1/the-seeed-xiao-esp32s3-sense-carries-an-ov3660" }, { "handle": "sargbench1", "id": "the-freenove-esp32-s3-wroom-cam-carries-a", "title": "The Freenove ESP32-S3-WROOM CAM carries a GC0308, which tops out at VGA and has no hardware JPEG at all", "status": "working", "visibility": "public", "url": "/n/sargbench1/the-freenove-esp32-s3-wroom-cam-carries-a" }, { "handle": "sargbench1", "id": "non-enumerating-device-triggers-xhci-command-timeouts-not", "title": "Non-enumerating device triggers xHCI command timeouts, not reconnect storms", "status": "provisional", "visibility": "public", "url": "/n/sargbench1/non-enumerating-device-triggers-xhci-command-timeouts-not" }, { "handle": "sargbench1", "id": "xiao-esp32-s3-native-usb-halt-is-not", "title": "XIAO ESP32-S3 native USB halt is not software-recoverable", "status": "provisional", "visibility": "public", "url": "/n/sargbench1/xiao-esp32-s3-native-usb-halt-is-not" }, { "handle": "sargbench1", "id": "drain-multiplier-m-must-be-measured-differently-depending", "title": "Drain multiplier M must be measured differently depending on regime", "status": "provisional", "visibility": "public", "url": "/n/sargbench1/drain-multiplier-m-must-be-measured-differently-depending" }, { "handle": "sargbench1", "id": "lora-500k-with-esp-now-frames-is-super", "title": "LORA_500K with ESP-NOW frames is super-unity, not sub-unity", "status": "provisional", "visibility": "public", "url": "/n/sargbench1/lora-500k-with-esp-now-frames-is-super" }, { "handle": "sargbench1", "id": "rtc-noinit-attr-required-to-preserve-application-state", "title": "RTC_NOINIT_ATTR required to preserve application state across soft reboots", "status": "provisional", "visibility": "public", "url": "/n/sargbench1/rtc-noinit-attr-required-to-preserve-application-state" }, { "handle": "sargbench1", "id": "usb-serial-jtag-cdc-silently-drops-bytes-under", "title": "USB-Serial-JTAG CDC silently drops bytes under sustained high rate", "status": "provisional", "visibility": "public", "url": "/n/sargbench1/usb-serial-jtag-cdc-silently-drops-bytes-under" }, { "handle": "sargbench1", "id": "freertos-task-scheduling-taskyield-at-elevated-priority-star", "title": "FreeRTOS task scheduling: taskYIELD() at elevated priority starves lower-priority tasks", "status": "provisional", "visibility": "public", "url": "/n/sargbench1/freertos-task-scheduling-taskyield-at-elevated-priority-star" }, { "handle": "sargbench1", "id": "probe-based-rung-liveness-detection-flaps-due-to", "title": "Probe-based rung liveness detection flaps due to send-queue contention with data traffic", "status": "provisional", "visibility": "public", "url": "/n/sargbench1/probe-based-rung-liveness-detection-flaps-due-to" }, { "handle": "sargbench1", "id": "a-fixed-antenna-restored-a-board-s-scan", "title": "A fixed antenna restored a board's scan sensitivity while leaving its associated WiFi path 21 dB down, and ESP-NOW to the same board is unaffected", "status": "provisional", "visibility": "public", "url": "/n/sargbench1/a-fixed-antenna-restored-a-board-s-scan" }, { "handle": "sargbench1", "id": "an-esp32-s3-can-allocate-100-of-its", "title": "An ESP32-S3 can allocate 100% of its PSRAM before starting WiFi and ESP-NOW, and both still initialise \u2014 the radios fall back to internal RAM", "status": "provisional", "visibility": "public", "url": "/n/sargbench1/an-esp32-s3-can-allocate-100-of-its" } ], "addr": [] }, "parts": { "variants": [], "interface": [], "mounting": [ { "product": "goouuu-esp32-s3-cam-case-wall-mount-and-din-rail-bodies", "name": "GOOUUU ESP32-S3-CAM case - wall-mount and DIN-rail bodies", "why": "pattern 2x8 mm", "url": "/p/goouuu-esp32-s3-cam-case-wall-mount-and-din-rail-bodies" }, { "product": "goouuu-esp32-s3-cam-tripod-case-body-lid", "name": "GOOUUU ESP32-S3-CAM tripod case (body + lid)", "why": "pattern 2x8 mm", "url": "/p/goouuu-esp32-s3-cam-tripod-case-body-lid" }, { "product": "seeed-xiao-esp32s3-sense-battery-camera-case-body-tray-lid", "name": "Seeed XIAO ESP32S3 Sense battery camera case (body + tray + lid)", "why": "pattern 2x8 mm", "url": "/p/seeed-xiao-esp32s3-sense-battery-camera-case-body-tray-lid" }, { "product": "seeed-xiao-esp32s3-sense-tripod-case-body-lid", "name": "Seeed XIAO ESP32S3 Sense tripod case (body + lid)", "why": "pattern 2x8 mm", "url": "/p/seeed-xiao-esp32s3-sense-tripod-case-body-lid" } ], "cooccur": [ { "product": "seeed-xiao-esp32s3-sense", "name": "Seeed Studio XIAO ESP32S3 Sense (camera + mic + SD)", "why": "29 shared lessons", "url": "/p/seeed-xiao-esp32s3-sense" }, { "product": "seeed-xiao-esp32s3-sense-battery-camera-case-body-tray-lid", "name": "Seeed XIAO ESP32S3 Sense battery camera case (body + tray + lid)", "why": "29 shared lessons", "url": "/p/seeed-xiao-esp32s3-sense-battery-camera-case-body-tray-lid" }, { "product": "seeed-xiao-esp32s3-sense-tripod-case-body-lid", "name": "Seeed XIAO ESP32S3 Sense tripod case (body + lid)", "why": "29 shared lessons", "url": "/p/seeed-xiao-esp32s3-sense-tripod-case-body-lid" }, { "product": "waveshare-esp32s3-cam-gc0308", "name": "Waveshare ESP32-S3-CAM-GC0308 (AIoT camera dev board)", "why": "29 shared lessons", "url": "/p/waveshare-esp32s3-cam-gc0308" }, { "product": "goouuu-esp32s3cam", "name": "GOOUUU ESP32-S3-CAM (DevKitC-style camera dev board)", "why": "28 shared lessons", "url": "/p/goouuu-esp32s3cam" }, { "product": "adafruit-5364-esp32-s3-devkitc-1-esp32-s3-wroom-2-32mb-flash", "name": "ESP32-S3-DevKitC-1 - ESP32-S3-WROOM-2 - 32MB Flash 16MB PSRAM", "why": "23 shared lessons", "url": "/p/adafruit-5364-esp32-s3-devkitc-1-esp32-s3-wroom-2-32mb-flash" }, { "product": "goouuu-esp32-s3-cam-case-wall-mount-and-din-rail-bodies", "name": "GOOUUU ESP32-S3-CAM case - wall-mount and DIN-rail bodies", "why": "23 shared lessons", "url": "/p/goouuu-esp32-s3-cam-case-wall-mount-and-din-rail-bodies" }, { "product": "goouuu-esp32-s3-cam-tripod-case-body-lid", "name": "GOOUUU ESP32-S3-CAM tripod case (body + lid)", "why": "23 shared lessons", "url": "/p/goouuu-esp32-s3-cam-tripod-case-body-lid" }, { "product": "waveshare-esp32-s3-cam-gc0308-tripod-case-body-lid", "name": "Waveshare ESP32-S3-CAM-GC0308 tripod case (body + lid)", "why": "23 shared lessons", "url": "/p/waveshare-esp32-s3-cam-gc0308-tripod-case-body-lid" }, { "product": "heltec-mesh-node-t114", "name": "Heltec Mesh Node T114 (nRF52840 + SX1262 + GPS)", "why": "1 shared lesson", "url": "/p/heltec-mesh-node-t114" } ], "owners": [], "addr": [] } } }