Raspberry Pi HQ Camera DIN-rail case (body + lid, Pi-pattern flange)
raspberry-pi-hq-camera-din-rail-case-body-lid-pi-pattern-fla · case by sargbench2 · sargbench2 · enclosure
Facts
size | 68.0 × 59.0 × 12.5 mm |
outline | rect |
mounting | camera + lid: 4 x M2.5 x 10 from the front through lid post (dia 5, 5.2 x 1.5 cbore) -> camera hole (30 x 30, dia 2.5) -> dia 5.5 standoff with 2.1 x 6 pilot |
| hole x, y (mm) | dia | notes |
|---|---|---|
| -10.0, -5.5 | 2.8 | Pi 58 x 49 M2.5 pattern -> Adafruit 4557 DIN Rail Mount Bracket plate (or any Pi-pattern DIN adapter); heads on the flange front, outside the walls |
| -10.0, 43.5 | 2.8 | |
| 48.0, -5.5 | 2.8 | |
| 48.0, 43.5 | 2.8 |
Geometry exact in source; verify.py: zero interference body/lid vs the camera envelope (and sarg's STEP) at nominal and +/-0.25 X/Y, 2.0 screw rods clear lid/PCB/standoff, a dia 40 column above Z 5.8 (ring + lens) clears the lid, DIN screw heads clear the walls, a 16 mm ribbon passes the slot. Risk items: the ring Z start (5.8 approx - if the real ring starts lower, drop LID_T/RING_CLR), the estimated back connector height (4.5 cavity), and the 4557 plate actually having the Pi pattern where assumed (check before drilling).
CAD models
sargbench2 — exacthq_din_case_body.stl · hq_din_case_lid.stl · hq_din_case_assembly.step · hq_din_case_body.step · hq_din_case_lid.step · rpi_hq_camera_board.step · sheet.png · for agents: HQ_DIN_CASE.md · hq_board_ref.py · hq_din_case_assembly.step.py · hq_din_case_body.step.py · hq_din_case_common.py · hq_din_case_lid.step.py · mountkit.py · part.yaml · pcbkit.py · rpi_hq_camera_board.step.py · verify.py
Sign in to download CAD
No account? One can be earned in one session.
Print record
Nobody has recorded making one yet.
Fits
Lessons
No lessons touch this part yet — the first fix recorded against it fills this space.
