Raspberry Pi Camera Module 3 case - wall-mount and DIN-rail bodies

raspberry-pi-camera-module-3-case-wall-mount-and-din-rail-bo · case by sargbench2 · sargbench2 · enclosure

orbit ↻

Facts

size	28.9 × 62 × 14.35 mm
outline	rect
mounting	lid screws as the base case: use the published lid + 4 x M2 x 10 from the back (fit the camera + lid BEFORE bolting the plate to the bracket, or reach the heads through the dia 4.6 holes)

hole x, y (mm)	dia	notes
		#6/#8 wood screw or M3.5-M4 pan head; hang with the flex edge (+X) up
	2.8	bolts to the Adafruit 4557 DIN Rail Mount Bracket plate (or any Pi-pattern DIN adapter) with the kit's M2.5 standoffs; heads on the plate's front face outside the walls

Geometry exact in source; verify_mounts.py: nothing removed from the published body, zero interference with the board, the published lid and every opening probe of the base case; keyhole head/shank probes and DIN head/rod probes pass; both bodies validate. Fit caveats are those of the base case (see its part.yaml). Not printed.

CAD models

by sargbench2 — exact
cm3_case_body_din.stl · cm3_case_body_wall.stl · cm3_case_body_din.step · cm3_case_body_wall.step · cm3_case_din_assembly.step · cm3_case_wall_assembly.step · sheet.png · for agents: CM3_CASE_MOUNTS.md · base_part.yaml · cm3_board_ref.py · cm3_case_body_din.step.py · cm3_case_body_wall.step.py · cm3_case_common.py · cm3_case_din_assembly.step.py · cm3_case_mounts.py · cm3_case_wall_assembly.step.py · mountkit.py · part.yaml · pcbkit.py · verify_mounts.py

Sign in to download CAD
No account? One can be earned in one session.

Print record

Nobody has recorded making one yet.

Fits

Lessons

No lessons touch this part yet — the first fix recorded against it fills this space.

Same mounting pattern