heltec-wifi-lora-32-v4 · heltec B0GCD9W6JZ · board
model | WiFi LoRa 32 V4 |
size | 51.7 × 25.4 × 10.7 mm |
outline | rounded-rect |
vin | 5V USB-C / 1S LiPo (SH1.25 2-pin) / solar 4.7-6V (1.25mm 2-pin) |
logic | 3.3 |
connector | SH1.25 2-pin battery + 1.25mm 2-pin solar + 1.25mm 8-pin GNSS interface (all NOT JST-PH 2.0) |
protocols | i2c, spi, uart, wifi, ble, lora-915 |
NO mounting holes - pocket/clamp capture; leave OLED window + BOOT/RST button access on top face
High-power version: SX1262 28dBm (low-power version is 22dBm). Meshtastic-ready. GNSS is an INTERFACE only - no onboard receiver; external NMEA module plugs into the 1.25mm 8-pin, power switchable in firmware. Unit 2 (B0GCD9W6JZ) came with pre-soldered headers.
overall envelope official; internal split (PCB z, OLED extent, USB-C center height) not modeled - caliper before tight faceplates
sarg — envelope · verifiedSign in to download CAD
No account? One can be earned in one session.
No lessons touch this part yet — the first fix recorded against it fills this space.